Gadgets

Why Durock Stabilizers Are Essential To Any Keyboard Build

A keyboard is one of the most used input devices for a computer. 

A keyboard, like an electronic typewriter, is made up of buttons that are used to generate letters, numbers, symbols and execute other duties. 

The following sections give more detailed information and answers to some of the most commonly asked topics concerning the keyboard. 

While they are self-contained devices, they require some assistance to ensure that your user experience is as smooth and fluid as possible such as that provided by a durock stabilizer.

What Is A Durock Stabilizer?

Stabilizers of various shapes and sizes are incorporated in all keyboards to level and support the keystrokes of your bigger keys, depending on the shape and size of your keyboard. 

Durock V2 stabilizers are available in two forms: clear and smoky, and they are screw-on stabilizers. 

This implies that these stabilizers can only be fitted on a keyboard PCB with screw holes for the Durock stabilizers.

Let’s look at some of the types in summary before diving into the details.

Costar Stabilizers 

They’re considered old fashioned and can only be found on older mechanical keyboards or newer subpar keyboards no one wants to mess with. 

Costar stabilizers are difficult to handle, calibrate, and install—rumour is that they rattle a lot.

Optical Stabilizers

Optical stabilizers can be found everywhere. You’ll find them in many of your usual major RGB brand names in the gaming section of the PC market. 

You’re pretty much stuck with optical switches if you utilize them. These stabilizers are tough to tune and are renowned for rattling.

Cherry Stabilizers

Screw-in, clip-in, and plate-mount are the most ubiquitous in the world of mechanical keyboards. 

They’re named Cherry because the stabilizer stems, like those on the Durock V2, are cross-shaped with a notch to match the fittings of Cherry MX-type switches.

Types Of Mechanical Keyboard Stabilizers 

Not all stabilizers are built the same, and will therefore not be mounted similarly. Some boards and plates may not be able to sustain a specific type of stabilizer, make sure to ask an expert such as Prevail Key Co. 

There are two types of mounting: plate mount and PCB mount.

Plate Mount

This is the most popular mounting style and the less expensive of the two primary varieties. It is commonly seen on pre-built keyboards and low-cost kits.

Plate Mount stabilizers are, well, mounted on a keyboard’s plate. The issues with this mounting style derive, strangely, from stability. 

Plate-mounted stabilizers are not always the best fit, resulting in rattling and wobbling. However, plate-mounted stabilizers are not doomed since you may make upgrades to address the difficulties.

PCB Mounted

PCB Mounted stabilizers are those that are physically mounted to the PCB. This mounting solution is considered far safer and more robust. 

Plate mount stabilizers are most commonly seen on mid and high-end boards. More affordable choices with PCB mount capability, such as the KBD67 Lite, were launched last year. 

Screw-in and clip-in PCB installation are the two options.

Screw In Stabilizers

This stabilizer is screwed into the PCB, resulting in a highly secure and tight fit with significantly reduced wobbling and instability. 

Screw-in stabilizers are far more common than PCB Mounts and hence more commercially available.

Clip In Stabilizer

This stabilizer is slot-mounted into the PCB, similar to plate mount stabilizers. At the expense of a more secure fit, this makes it considerably easier to remove than screw-in stabilizers. 

Clip-in stabilizer support mostly depends on your keyboard, as it is not as universally accepted as screw-in installation.

Why Durock Stabilizers Are The Best

Durock stabilizers look very unique in that the housing insert is a lovely transparent purple along with a stabilizer bar that is plated with gold for when you’re feeling opulent. 

Ideal for constructing a keyboard, with each component contributing to the overall beauty. These stabilizers are pretty reasonable for their unusual appearance, making them a wonderful choice. 

They are smoother than ordinary GMK stabilizers, in our opinion. Durock stabilizers are only available in screw-in type, meaning you can only use them on a bespoke keyboard. 

The three sizes are all available for purchase. Durock stabilizers are pre-clipped, which means the small feet on the bottom of the stabilizer housing are removed to increase stability and typing experience.

Many in the mechanical keyboard community regard Durock stabilizers as excellent grade screw-in stabilizers and good-quality plate mount stabilizers.

The biggest advantage is that it helps to stabilize the lengthier keys on your keyboard. PCB-Mount Stabilizers can be installed easily and directly into the PCB. 

Your stabilizer wires will fit securely in their housings thanks to Durock’s re-engineered stabilizer design, reducing rattling.

Although the V2 version of Durock Stabilizers made significant improvements, lubing your stabilizers is still necessary if you want a quiet, rattle-free stabilizer.

Another enticing characteristic of these stabilizers is their ease of installation. They are pre-clipped, so you won’t have to take further steps to mount them. 

Thanks to a straightforward screw-in setup that uses robust, high-quality gold plates and screws, you’ll get them on your board in no time. 

And by board, we mean any PCB board of your choosing. Yes, these stabilizers are universally compatible, allowing you to optimize any of your keyboard designs.

Conclusion

Make sure you research right on the topic before investing in a stabilizer. Stabilizers that screw directly into the PCB of your keyboard should be “PCB-Mount” or “Screw-In”. 

You’ll need to purchase these if your keyboard supports plate mount stabilizers. Modding stabilizers have a significant impact on the overall sound and typing experience of the keyboard. 

Whether you utilize plate mount or PCB mount, the goal is to eliminate rattling and provide a better fit for your keyboards keys.

In conclusion, these are an excellent complement for keyboard fans of all levels. Whether you’re a novice constructing your first board or an experienced keyboard fan, you’ll love these distinctive stabilizers!

Let us know if you found this piece helpful in terms of finding what you’re looking for. Happy buying and stabilizing! 

To Top

Pin It on Pinterest

Share This