The Ultimate Guide to Using High-Speed Chargers to Lower your Carbon Footprint

Using High-Speed Chargers to Lower your Carbon Footprint

Climate change has become a serious issue, and its impacts, whether in the form of floods, severe weather, more temperature changes, and similar others, are growing with every passing year. Owing to that, organizations and individuals are trying to reduce their carbon footprint from their ends. There are various options for organizations where they can reduce carbon emissions, but such areas are finite for individuals. 

For individuals who want to lead a low-carbon life, one of the best ways to reduce their carbon footprint relies on their phone usage and the use of a high-speed charger. But a high-speed charger does not just charge the phone faster but can also reduce carbon footprint and make the battery long-lasting. Find out more in this article.

Smartphones and Batteries are the Key to Reducing Personal Carbon Footprint

Since using the phone as long as possible before replacing it is the simplest way to reduce the personal carbon footprint, it is necessary to protect the phone’s battery. Here is the guideline to protect battery health:

  1. Avoid using your phone while charging

You should avoid using your phone while charging because it can take much longer to charge fully. The battery keeps draining and charging at the same time when you use the phone while charging. In addition, there are other risks, such as overheating, an increase in battery size, and an impact on charging capacity.

  1. Avoid wireless chargers (for now)

Wireless chargers seem an easy and attractive way to charge your phones. But it is recommended to avoid wireless charges for now because they can generate excessive heat that can impact battery health and even damage your phone entirely. 

  1. Avoid fully charging or draining your phone

When you fully discharge your device, you are putting the battery into a deep discharge state, which might make it less capable of holding the charge. The full cycle charges your phone witnesses, the quicker the battery degrades. Therefore, it is recommended to practice a partial discharge strategy.

  1. Avoid charging in an extreme weather

When your phone is charging, the battery generates heat, which can increase to a severe level in very hot weather. Similarly, if you are exposed to a freezing temperature, then it can damage your battery. So, you must warm up the phone to reach room temperature before charging. Therefore, it is highly recommended to avoid charging in extreme weather.

To sum up, if you manage to use a phone for a long period while keeping the battery healthy, you are reducing a significant amount of carbon footprint from your end.

How Do High-Speed Chargers Assist in Reducing Personal Carbon Footprint?

Until now, we have learned the best recommendation to keep a battery healthy and increase a phone’s lifespan. However, you can also reduce your carbon footprint with the use of a high-speed charger. 

A high-speed charger can charge a smartphone in minutes, reducing heat and other energy losses. Their high efficiency can be seen by the fact that a 100W fast charger can charge a 4,500mAh battery in only 15 minutes. But you should use a high-speed charger from a trustworthy manufacturer that prioritizes low carbon strategy. This is where Huntkey high-speed chargers come into action.

Huntkey is Asia’s renowned brand and the leading global provider of advanced products, such as quick chargers, PC monitors, power strips, laptop adapters, etc. Huntkey has long been promoting low carbon strategy and has even established the Huntkey Low-Carbon Alliance, in which Huntkey and its partners will develop and promote low-carbon technology. That’s the reason that all the Huntkey leading edge products are tailed towards low carbon emissions. Below is a glimpse of the three recommended high-speed chargers of Huntkey:

It is a USB-C high-speed charger that can output power in different ranges, i.e., 5V/3A, 9V/3A, 12V/3A, 15V/3A, and 20V/5A. Its wide output ranges allow it to charge smartwatches, smartphones, tablets, and even laptops at up to 3x faster speed. Besides, it is powered by GaN technology, ensuring its high energy efficiency and powerful heat dissipation while making it more compact. And before it went to the market, the high-speed charger had been through a variety of tests targeting its availability to withstand over-current, over-voltage, over-heating, and short-circuiting. 

It is a lightweight and small-size USB-C high-speed charger that can output power in 5V3A, 9V2.22A, (PPS) 3.3-5.9V3A, and (PPS) 3.3-11V1.8A ranges. Despite its compact size, this 20W iPhone charger can charge an iPhone 12 Pro to 50% in just 30 minutes. Moreover, it comes with other comprehensive protection, like overvoltage protection, fire-proof material, and temperature control. 

It is another high-speed charger that provides 3 output ports in which USB-C output power up to 47W, USB-A output power up to 12W, and USB-A +USB-A output power up to 18W. It offers wide compatibility and can charge a smartphone, tablet, and laptop at the same time. Moreover, its intelligent chip does not hurt the battery and provides other protection, like over current, over voltage, over charge, over temperature, and short-circuit. 

Wrapping Up

Considering the current world situation on carbon emissions, it is also our responsibility to reduce our carbon footprint. As discussed above, extending the service time of your phone is the easiest way to reduce your carbon footprint, and batteries play a key role here.

So, the best way to have a healthy battery is to follow the above recommendations and use a high-speed charger from a reputed provider like Huntkey. For years, Huntkey has been emphasizing the low carbon strategy, fulfilling its corporate social responsibility, and developing reliable and environmentally-friendly products. So, try out the high-speed charger of Huntkey and reduce your carbon footprint.


To Top

Pin It on Pinterest

Share This