Mold can be found almost anywhere and anytime. It’s usually a sign that there is excess moisture in the area or a potential water leak is occuring. The issue with mold is that it can grow and spread quite easily. While all mold spores aren’t necessarily dangerous, inhaling or touching mold spores can lead to serious health issues. Mold spores are very common, and anyone who has been in a crawl space, attic, basement or other indoor space with excess humidity has probably encountered them. There are a lot of ways to prevent mold from growing in your house, especially during the humid summer months when these mold spores thrive. Let’s take a look at the most effective methods you can use right now to avoid an outbreak of mushrooms indoors:
Change Your Dehumidifier/Air Purifier Filter Regularly
A dehumidifier puts moisture out of air when it is too humid. Dehumidifiers are used during the spring and summer. The machine is effective at reducing indoor humidity, but they can cause mold to grow if the filters aren’t changed regularly. Most dehumidifier filters need to be replaced every 2-3 weeks, and it’s a good idea to keep a regular maintenance schedule. If you don’t have a regular cleaning schedule, it may be best to avoid using a dehumidifier altogether. If you have a medical condition like asthma or allergies and use an air purifier, be sure to clean it regularly and change the hepa filter every 2 weeks even if it doesn’t appear dirty. Mold and bacteria can grow inside the air purifier even if it doesn’t show signs of being dirty.
Install A Carbon Vent
A carbon vent is a simple device that you can install in your house. It works by sucking air out of the house and bringing fresh air in. This helps to lower the humidity level in your home. You can either buy one or make one yourself. Here’s how to do it: – Install a duct fan with a carbon filter – This is a device that sucks air out of your house and brings in fresh air from outside. The carbon filter will aid to remove mold spores from the air inside your house. – Install an intake vent – This is an opening on the side of your home that will allow the fan to vent air out of the house. – Keep windows and doors closed when the fan is on – The fan is designed to lower the humidity of the air inside your house. It can also bring in outside air that has higher humidity. To prevent this, keep your windows and doors closed when the fan is on.
Use a Electronic Humidifier
Electronic humidifiers are designed to raise the humidity level in your home. Just like a regular humidifier, they add water to the air. But they do it in a more controlled way. Most of these devices will have a built-in filter that will keep mold spores from growing in the water. As with a regular humidifier, keep the water clean and change it regularly. Electronic humidifiers are a good choice if you are concerned about mold growth. However, they won’t lower the humidity in your home if it is already too humid. Electronic humidifiers can be a little more expensive than regular humidifiers, but they are more effective at lowering humidity.
Install A Dehumidifier
A dehumidifier will suck up moisture from the air. This is especially helpful if you have excess humidity on the inside of your house. You can install a dehumidifier in your basement or any other area of your house where you have high humidity. You may even want to install a few of them in the most humid areas of your home. Keep in mind that they need to have a drain. You will have to empty it out once a week. Dehumidifiers are most effective when they are placed in a room that is closed off from the rest of the house. These can be a bit more expensive to purchase, but they are a good way to prevent mold. They also work well at preventing allergies in the home.
Conclusion
Mold can be a problem in any household. It is especially common during the summer when the humidity and temperature levels are high. You can prevent mold by lowering the humidity in your home, keeping the house clean, and changing dehumidifier/Air purifier filters regularly. All you have to do is implement a few of these methods, and your house will have its best chance of being mold free of toxins in no time.
