Are You Looking for the GE Universal Remote Codes? Yes, You came to the correct platform to get Working GE Remote Codes from here. These days, we have a lot of gadgets in our homes. In a similar vein, we have a TV, CD player, set-top box, and numerous other items. We should use the remote that comes with each device in order to operate it. But there are so many remotes that sometimes we get lost. Programming a GE universal remote with various codes requires only a few simple steps.
Ge Universal Remote Codes
| ABEX | 185 |
| ACME | 0008, 0050 |
| ADA | 20 |
| ADC | 0002, 0006 |
| ADMIRAL | 0020, 0226, 0001 |
| ADVENT | 0176, 0922 |
| ADVENTURA | 174 |
| AIKO | 58 |
| AIWA | 0195, 0196, 0227, 0269 |
| ALLERON | 51 |
How to Program the GE Universal Remote After doing everything else, turn on the device you want to use the GE Universal Remote to control.
- After that, press and hold the “Setup button” (6) until the red light illuminates.
- Now press the button on the device you want to use. such as a DVD, a set-top box, or anything else.
- Now you need to enter the device code from the list above. If you see more than one code, start with the one that is closest to the top.
- When the code is entered correctly, the red light will turn off.
- Now, aim at the device and press the power button. The device will turn off if the codes on your GE universal remote control are working; if not, try another one from the list of GE remote control codes.
How to Use Code Search to Program a GE Universal Remote
If you were unable to locate the device-specific key code at the time, you can set your universal remote to search for the appropriate key code.
- First, “Turn the Device On,”
- Press and hold the “Setup” button,
- enter the (three-digit) code,
- hold down the “Power Button” on the remote, and then press the Channel up until the device, in this case, your television, “Turns Off.”
- Although the above method may require additional time, it is crucial to locate your key code.
- After completing the above steps, your remote should be able to perform all of its functions.
Before programming your GE Universal Remote, turn on the device you want to control with your GE Universal Remote after doing everything else.
- The setup button should then be pressed and held down until the red light comes on.
- Now press the button on the device you want to use. such as a DVD, set-top box, or something else.
- If you see more than one code, enter the first one from the top if you see more than one.
- When the code is entered correctly, the red light will turn off.
- Now, aim at the device and press the power button. The device will turn off if the codes on your GE universal remote control are working; if not, try a different code from the list of GE remote control codes.
What if the GE Universal Remote Code Doesn’t Work?
- If the first code doesn’t work, try other codes from the table list first.
- However, if the issue persists, change the remote’s batteries.
- If there is a physical barrier between the remote and the device you want to control, try to remove it.
- Try using more buttons and features now. You should also try for more features because a GE Universal Remote does not work with all features.
This was all about programming a GE Universal Remote to eliminate the confusion caused by using multiple remotes. Because it’s so straightforward, anyone can carry it out with ease. Therefore, it is your turn to try it.
